Evergreen Solar ES-A-195-fa3b, 195 Watt 12 Volt Nominal Black Frame PV Solar Panel Blemished - Pallet 28
Blemished modules are only visually blemished. The are fully warrantied, UL Listed, and generate normal rated power.
ES-A SERIES
photovoltaic panels
A range of high quality String Ribbon™ solar panels offering exceptional performance, cost effective installation and industry-leading environmental credentials made with out revolutionary wafer technology.
- No power below nameplate. Never pay for power you're not getting
- Get up to 5W more than nameplate* For enhanced field performance
- Industry's lowest voltage per watt rating Delivers the most cost-effective installs
- UL4703 certified cables For use with the highest efficiency transformer-less inverters
- New extended length cables Eliminates home-run wiring
- New lockable connectors** Compiles with the latest codes for accessible arrays
- Most extensive range of mounting options Allows installs virtually anywhere and anyhow
- Smallest carbon footprint of any manufacturer For the greenest of the green
- 100% cardboard free packaging Minimizes job site waste and disposal costs
- 5 year workmanship and 25 year power warranty***
Born in the USA
* Maximum power up to 4.99W above name plate rating
** Locking sleeve not supplied with the panel.
*** For full details see the Evergreen Solar Limited Warranty.
This product designed to meet UL 1703, US 4703, UL Fire Safety Class C, IEC 6215 Ed.2 and IEC 61730 Class A standards.
Electrical Characteristics
Standard Test Conditions (STC)1
Pmp2: 195 Watts
Ptolerance: -0/+4.99 Watts
Pmp, max 199.99 Watts
Pmp, min: 195.00 Watts
Nmin: 12.4%
Pptc3: 175.9 Watts
Vmp: 17.9 Volts
Imp: 10.90 Amps
Voc: 22.5 Volts
Isc: 11.70 Amps
Nominal Operating Cell
Temperature Conditions (NOCT)4
Tnoct: 45.4°C
Pmax: 142.7 Watts
Vmp: 16.4 Volts
Imp: 8.70 Amps
Voc: 20.6 Volts
Isc: 9.32 Amps
1 100 W/m2, 25°C cell temperature, AM 1.5 spectrum;
2 Maximum Power Point or rated power
3 At PV-USA Test Conditions: 1000 W/m2, 20°C ambient temperature, 1 m/s wind speed
4 800 W/m2, 20°C ambient temperature, 1 m/s wind speed, AM 1.5 spectrum
Low Irradiance
The typical relative reduction of module efficiency at an irradiance of 200W/m2 both at 25°C cell temperature and spectrum AM 1.5 is 0%
Temperature Coefficients
αPmp: -0.43 %/°C
αVmp: -0.40 %/°C
αImp: -0.03 %/°C
αVoc: -0.31 %/°C
αPmp: +0.05 %/°C
System Design
Series Fuse Rating5 20 Amps
Maximum System Voltage (UL): 600 Volts
5 Also known as Maximum Reverse Current
Mechanical Specifications
Dimensions: 65.0'' x 37.5'' x 1.8" (1651 x 953 x 46 mm)
Weight: 41.0 lbs (18.63 kg)
Product constructed with 114 poly-crystalline silicon solar cells, anti-reflective tempered solar glass, EVA encapsulant, polymer back-skin and a double-walled anodized aluminum frame. Product packaging test to International Safe Transit Association (ISTA) Standard 2B. All specifications in this product information sheet conform to EN50380. See the Evergreen Solar Safety, Installation and Operation Manual and Mounting Design Guide for further information on approved installation and use of this product.
Call or email our Shipping department for a quick Freight quote!!! 1-800-810-9939 x 4234 or shippingestimates@affordable-solar.com
|
