KACO proLOG M Ethernet

  • Item Code: 3495

  • Installers call for Wholesale pricing

  • Your Price: $993.30
  • List Price: $993.30
  • You Save:
 

Average Rating: 0


  • KACO proLOG M Ethernet

    Monitoring and data logging for PV systems

    The KACO proLOG monitoring system allows you to supervise your photovoltaic installation from your PC. The system is used to log the current, voltages, temperatures, performance and yield data of each individual inverter as well as the data of external sensors.

    KACO proLOG automatically returns a message by e-mail in the event of a deviation from the permissible operating status. The alarm criteria can be set individually according to the specific requirements of your PV installation. Stored installation data is sent daily to an e-mail address specified by the user.

    You can connect to KACO proLOG at any time from your PC so that you can monitor your PV installation and check the actual performance of your KACO inverters and additional sensors.

    Optionally, the recorded system data can be stored online via the KACO blueplanet web server and made available in a password-protected form. KACO blueplanet web is accessed via the Internet.

    New Features
    • Verification of ISP Connection
    • Data synchronization with blueplanet web
      • Time
      • Software update for KACO proLOG
      • Backup of system settings
    Basic Features
    • Direct access to KACO proLOG for a PC or laptop
    • Monitoring of the performance of KACO inverters and external sensors via a web browser
    • Configuration of KACO proLOG including the requested alarm criteria
    • Alarm notification by email
    • No further software will be required
    • Optional energy meter, irradiation sensor, temperature sensor and current sensor can be connected
    • Daily transmission of measured data and performance to an email address specified by the user
    • Data storage interval for average values can be set in the range for 5-60 minutes
    • Local data analysis downloaded through either the integrated Ethernet connection or the integrated Compact Flash slot
    • Connection of up to 32 KACO inverters via RS485 interface
    • On-site display of KACO proLOG function via 6 LEDs, in proLOG M, and 4 LEDs and an LCD display in the proLOG XL
    Optional Features
    • Graphical display of PV system data from the KACO blueplanet web server, such as total energy output
    • Display of all data logged by the KACO inverters; generator power, generator voltage, generator current, geed-in grid voltage, grid current and device temperature
    • Personalized alarm settings via KACO blueplanet web
    • Reporting function for generating a database over a user-defined period of time
    • Worldwide access through KACO blueplanet web via any Internet connection (e.g. DSL, Cable)
    • Allows data charts to be integrated into your personal or company homepage
    Alarm options for each integrated modem type
    Modem Type: Ethernet
    Direct connections: PC to KACO proLOG: PC with Ethernet card
    Send Alarm Via: e-mail
    Please Note: Ethernet Network must allow emails to be sent. Please supply the IP and gateway when you register your proLOG for the blueplanet web service

    Overview of all KACO proLOG functions KACO proLOG M
    proLOG of inverters that can be connected: blueplanet web Ethernet Compact Flash Card
    Number of inverters that can be connected: 32
    Address range for each inverter: 1 to 32
    Data port for connecting inverters and sensors: RS485
    Analog ports for connecting sensors: 1
    Digital ports for connecting sensors: 1
    Alarm or So ports: 1
    Display options: 6 LEDs
    Memory: Compact Flash Card
    Data port for local analysis: Ethernet
    Data storage intervals: 5 to 60 minutes
    Integrated transformer: Included

    KACO proLOG technical data
    Ambient Temperatures
    Operation: 32°F to 131°F
    Storage and transportation: 5F° to 150°F
    Electrical Data
    Current consumption: apprx. 4 watts
    External power supply: 120 volts
    Analog inputs (customizable): 1 VDC to 1 VDC (Max log: 24 VDC) 0 mA to 20 mA (Max load: 40 mA / 3 VDC) PT 1000 resetance testing
    Digital inputs: Low=0VDC to 7 VDC, High = 9 VDC to 24 VDC)
    Digital outputs: Optocoupler output (max load: 70 VDC / 50 mA)
    Internal battery (for internal cloak): Lithium Cell / Type Li2032
    Mechanical Data
    Enclosure dimensions KACO proLOG: 9" x 8.125" x 3.125" (228.6 x 206.4 x 79.4 mm)
    Installation: Wall installation
    Enclosure: IP21 / NEMA 2 (indoor enclosure)
    Weight: 2 lbs (0.91 kg)

    KACO Standard Web Monitoring
    Standard lifetime contract included with all monitoring hardware.
    Production data (kWh) summarized by day, week, month, and year
    Secure remote login
    Data transmission in 15 minute increments
  • No information available
  • Length: 9"
    Width: 8.13"
    Height: 3.13"
    Weight: 3 lbs