Kaco proLOG X DSL

Store Learn Residential Commercial Installers Support About Us

1.800.810.9939

Site Map

View Cart

Check Out

Store

KACO proLOG X DSL
Item Code : 3496
Our Price : $ 1,183.00
List Price: ~~$ 1,485.00~~
You Save: $ 302.00 (20.34 %)
Quantity:



Shipping Estimate - estimates are for lower 48 US only
Select Your Country:
Enter Your City:
Enter Your ZipCode:

KACO proLOG X DSL

Monitoring and data logging for PV systems

The KACO proLOG monitoring system allows you to supervise your photovoltaic installation from your PC. The system is used to log the current, voltages, temperatures, performance and yield data of each individual inverter as well as the data of external sensors.

KACO proLOG automatically returns a message by e-mail in the event of a deviation from the permissible operating status. The alarm criteria can be set individually according to the specific requirements of your PV installation. Stored installation data is sent daily to an e-mail address specified by the user.

You can connect to KACO proLOG at any time from your PC so that you can monitor your PV installation and check the actual performance of your KACO inverters and additional sensors.

Optionally, the recorded system data can be stored online via the KACO blueplanet web server and made available in a password-protected form. KACO blueplanet web is accessed via the Internet.

New Features

Verification of ISP Connection
Data synchronization with blueplanet web

Time
Software update for KACO proLOG
Backup of system settings

Basic Features

Direct access to KACO proLOG for a PC or laptop
Monitoring of the performance of KACO inverters and external sensors via a web browser
Configuration of KACO proLOG including the requested alarm criteria
Alarm notification by email
No further software will be required
Optional energy meter, irradiation sensor, temperature sensor and current sensor can be connected
Daily transmission of measured data and performance to an email address specified by the user
Data storage interval for average values can be set in the range for 5-60 minutes
Local data analysis downloaded through either the integrated Ethernet connection or the integrated Compact Flash slot
Connection of up to 32 KACO inverters via RS485 interface
On-site display of KACO proLOG function via 6 LEDs, in proLOG M, and 4 LEDs and an LCD display in the proLOG XL

Optional Features

Graphical display of PV system data from the KACO blueplanet web server, such as total energy output
Display of all data logged by the KACO inverters; generator power, generator voltage, generator current, geed-in grid voltage, grid current and device temperature
Personalized alarm settings via KACO blueplanet web
Reporting function for generating a database over a user-defined period of time
Worldwide access through KACO blueplanet web via any Internet connection (e.g. DSL, Cable)
Allows data charts to be integrated into your personal or company homepage

Alarm options for each integrated modem type
Modem Type: Ethernet
Direct connections: PC to KACO proLOG: PC with Ethernet card
Send Alarm Via: e-mail
Please Note: Ethernet Network must allow emails to be sent. Please supply the IP and gateway when you register your proLOG for the blueplanet web service

Overview of all KACO proLOG functions KACO proLOG XL
proLOG of inverters that can be connected: blueplanet web Ethernet Compact Flash Card
Number of inverters that can be connected: 32
Address range for each inverter: 1 to 32
Data port for connecting inverters and sensors: RS485
Analog ports for connecting sensors: 4
Digital ports for connecting sensors: 4
Alarm or So ports: 1
Display options: LCD Display, 4 LEDs
Memory: Compact Flash Card
Data port for local analysis: Ethernet
Data storage intervals: 5 to 60 minutes
Integrated transformer: Included

KACO proLOG technical data
Ambient Temperatures
Operation: 32°F to 131°F
Storage and transportation: 5°F to 150°F
Electrical Data
Current consumption: apprx. 4 watts
External power supply: 120 volts
Analog inputs (customizable): 1 VDC to 1 VDC (Max log: 24 VDC) 0 mA to 20 mA (Max load: 40 mA / 3 VDC) PT 1000 resetance testing
Digital inputs: Low=0VDC to 7 VDC, High = 9 VDC to 24 VDC)
Digital outputs: Optocoupler output (max load: 70 VDC / 50 mA)
Internal battery (for internal cloak): Lithium Cell / Type Li2032
Mechanical Data
Enclosure dimensions KACO proLOG: 9" x 8.125" x 3.125" (228.6 x 206.4 x 79.4 mm)
Installation: Wall installation
Enclosure: IP21 / NEMA 2 (indoor enclosure)
Weight: 2 lbs (0.91 kg)

KACO Standard Web Monitoring
Standard lifetime contract included with all monitoring hardware.
Production data (kWh) summarized by day, week, month, and year
Secure remote login
Data transmission in 15 minute increments

Products

Recently Viewed Items

Newsletter

Rebates