Apollo Solar Low Temperature Overvoltage Bypass

Store Learn Residential Commercial Installers Support About Us

1.800.810.9939

Site Map

View Cart

Check Out

Store

Apollo Solar Low Temperature Overvoltage Bypass

Apollo Low Temperature Overvoltage Bypass
Item Code : 3099
Our Price : $ 148.00
List Price: ~~$ 185.00~~
You Save: $ 37.00 (20.00 %)
Quantity:



Shipping Estimate - estimates are for lower 48 US only
Select Your Country:
Enter Your City:
Enter Your ZipCode:

Apollo Low Temperature Over voltage Bypass

Model 0 10: This is the 50°F (10°C) version. Call for other temperatures.

Protect PV System Equipment From High PV Open-Circuit Voltages At Low Temperatures

Automatically Bypasses PV Module at Low Temperatures to Drop Voc

Expand the Input Voltage Range of any Inverter or Charge Controller

Add extra PV module to every string
Use with any modules up to 85 Voc
Any string voltage up to 600 VDC
Switch up to 8 Amps per string
Choice of temperature point

Complete Safety at the Lowest of Temperatures without Compromising the High-Temperature Performance.

Size arrays for maximum power and forget the cold/Voc problem
MC connectors - quick wiring
Sticks to back of any module
Very low power consumption
Fail safe to low voltage output

Modules available for 32°F to 50°F (0°C or 10°C) (Other temperature modules on request)

Size the PV Array for Optimum Performance
Every PV array can now be sized without regards to high open circuit voltages at low temperatures. The Apollo Solar LTOB automatically switches modules out of the circuit if the temperature falls below the specified point.

Simple, Reliable Operation.
On the graph (see data sheet), the LTOB removes 1 module from the 6-module string keeping Voc under 140V. When the temperature falls below 50°F (10°C) the LTOB turns on and the top module is switched out of the circuit so the Voc drops to 120V. The 5-module string is below the 140V limit down to -40°F (-40°C). When the temperature rises, the LTOB turns off and the module is switched back into the circuit.

Fast, Easy Installation
The Apollo Solar LTOB units are supplied with an adhesive tape on the back side. Just peel off the backing layer and stick the LTOB and Temperature Sensor to the back of the PV module to be cut from the string. Simply snap the MC connectors together as shown in the diagram (see data sheet). At normal or high temperatures the LTOB connects straight through and the PV array functions normally.

Specifications
Maximum PV Module Voc: 85 VDC (Sanyo HIT200 PV modules are 79.88 Voc at -40°F (-40°C))
Maximum String Voltage: 600 VDC
Maximum String Current: 8 amps DC
LTOB Power Consumption: 10 mA from the PV module
Model Number: 0 10 (Other temperatures available on request).
Turn off temperature: 0°C 10°C
Turn on temperature: 5°C 15°C
Temperature-switch accuracy: ±2°C
Environmental rating: NEMA 4

Weight: 0.5 lbs (0.227 kg)
Dimensions (HWD): 4.6 “x 3.6” x 1.4” (117 x 92 x 36 mm)

Products

Recently Viewed Items

Newsletter

Rebates