Apollo Solar T80 Wireless Remote Display

Store Learn Residential Commercial For Installers Support

1.800.810.9939

Site Map

View Cart

Check Out

Support

Store

Apollo Solar T80 Wireless Remote Display

Apollo Wireless Remote Display
Item Code : 3094
Our Price : $ 309.00
List Price: ~~$ 399.00~~
You Save: $ 90.00 (22.56 %)
Quantity:



Shipping Estimate - estimates are for lower 48 US only
Select Your Country:
Enter Your City:
Enter Your ZipCode:

Apollo Wireless Remote Display

RD 100 Wireless and RD Wired Features and Benefits

Displays comprehensive status of PV array, and Battery system
Battery State of Charge: % Full, Bar Graph and Amp-Hours
PV current and voltage
Battery charge/discharge Amps
90 days of system history
Wireless version:
100 foot range in buildings
300 feet outside (line of sight)
Repeater available
FCC approved.
Includes rechargeable batteries
Wired version: CAT5 cable sends data and power from the T80
Desktop or wall mount
Transflective LCD with back light

Monitor the PV - Battery System from anywhere
Battery system management in a convenient portable package. See what the PV array, Charge Controller, Batteries and Load are doing any time. Check the results for each day for the last 90 days.

Battery Energy Monitor Display is Essential
The T80 TurboChargerTM includes a built-in energy monitor based on TriMetric technology which tracks power production and consumption then calculates the energy remaining in the battery. State of Charge (SOC) is displayed in Percent Full, Amp-hours and bar graph format. This is the "gas gauge" that is essential in battery based systems. The T80 goes further by recording 90 days of historical data on energy production, usage, and number of days since fully charged. The Remote Display shows all the information at a glance at a convenient location.

Wireless Option Card for the T80 TurboCharger^TM
The Wireless DataComm Board installed in the T80 Option Card slot comes with a chassis mount antenna.

Simple installation
No set up or programming. The wireless version couldn't be easier, just turn it on. The wired version is plug and play. Either Remote Display can be added to any T80 TurboCharger^TM in the field.

Wireless Version RD100
The wireless board includes in internal antenna and rechargeable NiMH batteries with on board charging. Charging input may be 12v to 24v DC or 115VAC using the plug-in wall transformer.

Wired version RD-Wired
The serial port in the T80 provides the data and power for the Remote Readout using a 4 wire cable.

Shipping Weight: 2.2 lbs. (1 kg)
Shipping Dimensions (HWD): 11”x 8" x 7” (280 x 200 x 180 mm)

Weight: 1.4 lbs (0.635 kg)
Dimensions (HWD): 7.3 “x 4.3” x 2.4” (185 x 110 x 60 mm)

Products

Recently Viewed Items

Newsletter

Rebates