ASE-260-DGF/50, 260 Watt 50 Volt Nominal Solar Panel, Pallet 20

Store Learn Residential Commercial Installers Support About Us

1.800.810.9939

Site Map

View Cart

Check Out

Store

ASE-260-DGF/50, 260 Watt 50 Volt Nominal Solar Panel, Pallet 20

Schott ASE-260-DGF/50, 260 Watt Solar Panel 50v - Pallet 20
Item Code : pal3214

Discontinued

ASE-260-DGF/50, 260 Watt Solar Panel, 50 Volts Nominal - Pallet 20

6/8/09 Discontinued. Schott announced that it will be streamlining its global manufacturing capacity and will be ending production at their Billerica, Mass. USA site on 7/31/09.

Shott will continue to honor ASE 300 module warranties.

Schott will re-box the cartons of 20 when they drop ship. The re-box fee is $20 for each module left on the pallet ($380 re-box when you buy 1 and $20 if you buy 19).

DG = Double Glass
F = Frame
/50 = Nominal Voltage at STC

Utilized in a wide range of applications, the ASE 260/DGF-50 is a member of the ASE line of solar power modules. This industrial-grade module is extremely powerful and built to meet SCHOTT Solar's high standards. The module delivers maximum performance in large systems that require higher voltages, including the most challenging conditions of military, utility and commercial installations. For superior performance, quality and peace of mind, ASE modules are renowned as the first choice among those who recognize that not all solar modules are created equal.

Faster Installation

Large surface area requires fewer interconnects and structure members.
Multi-Contact Plug-n-Play connectors mean source-circuit wiring takes just minutes.
Unique mounting systems available from commercial roofs eliminate need for traditional mounting rails, heavy ballast, and roof penetrations

More Reliability

Bypass diode protection for every 18 solar cells in series, thus minimizing power loss, and mitigation overheating/safety problems
Advanced encapsulation system ensures steady long-term module performance by eliminating degradation associated with traditional EVA-encapsulated modules.
Moisture impermeable glass on both sides of the module protects against tears, perforations, fire, electrical conductivity, delamination and moisture.
Patented no-lead, high-reliability soldering system guarantees long time and ensures against environmental harm should the module break or be discarded.

Higher Quality

Each of the module's 216 individual semi-crystalline silicon cells is inspected and power matched to ensure consistent performance between modules.
Every module is tested utilizing a calibrated solar simulator to ensure that the electrical ratings are within the specified tolerance for power, voltage, and current.
Module-to-module wiring loss is factored into the module's labeled electrical ratings by testing through the module's cable/connector assemblies.

Independently Certified

The ASE-260-DGF/50 is independently certified to meet IEE 1262, IEC 61215, and UL 1703 Standards
It is also the only standard module in the industry to receive a UL (Underwriters Laboratories) Class A fire rating.

Electrical Data¹
Power (max): 260 Watts
Voltage: 48.7 Volts
Current: 5.3 Amps
Open-circuit voltage: 60.8 Volts
Short-circuit Current: 5.9 Amps
The rated power may only vary by ±2% and all other electrical parameters by ±10%.
NOCT-value (800 W/m², 20°C, 1 m/sec) = 45°C
¹ The electrical data applies to standard test conditions (STC): Irradiance at the module level of 1.000 W/m² with spectrum AM 1.5 and a cell temperature of 25°C

Dimensions and Weights
Dimensions (LW): 74.5" x 50.5" (1892.3 x 1282.7 mm)
Weight: 107 (± 5) lbs/46.6 (± 2) kg
Area: 26.13 ft² (2.43 m²)

Characteristic Data
Solar cells per panel: 216
Type of solar cell: Semi-crystalline solar cells (EFG process) 10x10 cm²
Connections: 10 AWG single conductor, stranded copper with Multi-Contact connector (MC3). Junction box comes with 10 built-in bypass diodes.

Cell temperature coefficients
Power Tk (Pp): -0.47% / °C
Open-Circuit voltage Tk (Voc): -0.38 % / °C
Short-circuit current Tk (Ics): 0.10 % / °C

Limits
Maximum system voltage: 600 VDC U.S.
Operating module temperature: -40°C to 90°C
Ul certified design load: 50 PSF
Equivalent wind resistance: Wind speed of 120 mpg (192 km/h)
The right is reserved to make technical modifications. For detailed product drawings and specifications please contact SCHOTT Solar or an authorized reseller.

Certifications and Warranty
The ASE-260-DGF/50 has been independently certified to IEC 61215, IEEE 1262, UL 1703 (Class A Fire rating.)
The ASE-260-DGF/50 comes with a 20 year power warranty (see terms and conditions for details).

Due to size these modules must ship by freight. Please call 1-800-810-9939 for a free shipping quote.

Normally available in quantities of 20.

Schott will re-box the cartons of 20 when they drop ship. The re-box fee is $20 for each module left on the pallet ($380 re-box when you buy 1 and $20 if you buy 19).

Products

Recently Viewed Items

Newsletter

Rebates