Solar Boost 3024iL Blue Sky Charge Controller

Store Learn Residential Commercial For Installers Support

1.800.810.9939

Site Map

View Cart

Check Out

Support

Store

Solar Boost 3024iL, Blue Sky Charge Controller

Blue Sky Solar Boost 3024iL Charge Controller
Item Code : 3531
Our Price : $ 345.00
List Price: ~~$ 389.00~~
You Save: $ 44.00 (11.31 %)
Quantity:



Shipping Estimate - estimates are for lower 48 US only
Select Your Country:
Enter Your City:
Enter Your ZipCode:

Blue Sky Solar Boost 3024iL MPPT Charge Controller, 30/40 Amp, 12/24V

Maximum Power Point Tracking Photovoltaic Charge Controller with load control and IPN™ Network Interface

Patented Maximum Power Point Tracking (MPPT) technology allows Solar Boost 3024iL to increase charge current up to 30% or more compared to conventional charge controllers. Don’t waste your money by throwing PV power away!

Solar Boost 3024iL’s advanced fully automatic 3-stage charge control system will properly charge flooded lead-acid, AGM and GEL batteries resulting in improved battery performance with less maintenance. The dual 30/40 amp rating will deliver at up to 30 amps in 24 volt systems, or up to 40 amps in 12 volt systems. An automatic or manual equalize function is also provided to periodically condition flooded lead-acid batteries. To further enhance versatility, a user configurable auxiliary output and Blue Sky Energy’s advanced IPN™ network interface are also included.

The user configurable auxiliary output can serve as either a 20 amp load controller, or as a 2 amp auxiliary battery charger. The load control feature can be used to limit excessive battery discharge in unattended remote systems, whereas the auxiliary battery charge feature is ideal for charging a separate battery such as the engine battery in an RV. The auxiliary output can also provide fully adjustable dusk to dawn lighting control.

Blue Sky Energy’s advanced Integrated PowerNet™, or IPN Network, allows up to 8 IPN capable charge controllers to communicate with each other and operate as a single machine rather than separate charge controllers. The IPN network also allows networked controllers to share an optional battery temperature sensor and remote display. The IPN network does not require a display or other special communication hardware to operate.

Features

Get Improved Performance From Your PV Modules and Batteries
40 amp 12V or 30 amp 24V rating supports a wide range of applications
Auxiliary output serves as 20 amp load controller or 2 amp battery charger
Load controller provides fully adjustable dusk to dawn lighting control
IPN network interface coordinates multiple controllers & shares optional battery temperature sensor & display
Optional IPN-ProRemote display provides complete charge control & battery system monitoring, eliminating the need for a separate battery monitor device
3-Stage charge control with filtered PWM output & auto/manual equalization improves battery performance & life
MPPT power converter can charge 12 volt batteries from 24 volt PV module
Durable powder coat finish & conformal coated electronics resist corrosion
Full 24 month limited warranty, optional extended coverage available
Battery temperature sensor input
ETL listed to UL STD. 1741, certified to CAN/CSA STD. E335-1/2E, CE labeled

How Do Solar Boost™ Controllers Increase Charge Current?

Solar Boost controllers increase charge current by operating the PV module in a manner that allows the module to produce all the power it is capable of. A conventional charge controller simply connects the module to the battery when the battery is discharged. When the 75W module in this example is connected directly to a battery charging at 12 volts its power production is artificially limited to about 53 watts. This wastes a whopping 22 watts or nearly 30% of the available power!

Patented MPPT technology used in Solar Boost controllers operates in a very different fashion. The Solar Boost controller continually calculates the module’s maximum power voltage, in this case 17 volts. It then operates the module at its maximum power voltage to extract maximum power. The higher power extracted from the module is then provided to the battery in the form of increased charge current. In conditions where extra PV power is not available, Solar Boost controllers will operate as a conventional controller with very low voltage drop.

The actual charge current increase you will see varies primarily with module temperature and battery voltage. In comfortable temperatures, current increase typically varies between 10 to 25%, with 30% or more easily achieved with a discharged battery and cooler temperatures. What you can be sure of is that Solar Boost charge controllers will deliver the highest charge current possible for a given set of operating conditions.

Specifications

Output Current Rating: 30 Amp @ 24 Volts / 40 Amp @ 12 Volts
Nominal Battery Voltage: 12 / 24VDC
PV Input Voltage: 57VDC maximum
Power Consumption: 0.35W Typical standby / 1.0W Typical charge on
Charge Algorithm: 3-stage Bulk/Acceptance/Float Plus Equalize
Acceptance Voltage: 14.4VDC (range 14.0 – 14.8VDC, 10.0 – 40.0VDC)
Float Voltage: 13.2VDC (range 13.2 – 13.8VDC, 10.0 – 40.0VDC)
Equalization Voltage: 15.2VDC (range 10.0 – 40.0VDC ) / automatic or manual operation
Auxiliary Output Function: Single output field configurable as either: 20 Amp load controller –or– 2 Amp auxiliary battery charger
Aux. Battery charge: 2 Amp typical, same charge voltage as primary battery
Load Control: 20 Amp maximum; ON @ 12.6VDC/ OFF @ 11.5VDC (Range 10.0 – 40.0VDC, or net battery amp-hours)
Dusk-to-Dawn Control: Variable Post-Dusk and Pre-Dawn timers, Range 0.5 - 20.0 Hour
Temperature Compensation: Optional sensor adjusts charge voltage based on measured battery temperature, -5.00 mV/C/cell correction factor (Range -0.00 to -8.00 mV/C/cell ) / sensor range -60 to +80C
Power Conversion Efficiency: 97% Typical @ 28 Volt 24 Amp Output
Cabinet Dimension: 6 7/8”H x 6 5/8” W x 3 3/8”D (17.4cm x 16.8cm x 8.59cm)
Analog Input Accuracy / Range: Battery & Aux. Battery voltmeters, 40.0VDC +/-0.50% FS / PV voltmeter, 60.0VDC +/-0.50% FS, 42.0A +/-0.50% FS
Communication: Blue Sky Energy’s proprietary IPN Network interface
Approvals: ETL Listed to UL STD. 1741, Certified to CAN/CSA STD. E335-1/2E, CE labeled, FCC part 15 certified
Environmental: -40 to +40C, 10 – 90% RH non-condensing

Typical Applications
Medium 12/24V systems; larger RV’s & Boats, on or off grid cabins or homes, larger industrial & agricultural. Includes aux. output for 20A load control or 2nd battery charge, and IPN™ network interface to easily combine multiple units for very large systems.

Weight: 5.4 lbs (2.48kg)
Dimensions (LxWxD): 6 7/8” x 6 5/8” x 3 3/8” (17.4cm x 16.8cm x 8.59cm)

Products

Recently Viewed Items

Newsletter

Rebates