BP Solar BP-3125J, 125 Watt Solar Panel

Store Learn Residential Commercial Installers Support About Us

1.800.810.9939

Site Map

View Cart

Check Out

Store

Affordable Solar BP Solar BP-3125J, 80 Watt Solar Panel at lowest prices .Solar panel products with free tech support. We also provide Solar Panels likes Home Solar Panels, Free Solar Panels, Solar Panel Kit, Solar Heating Panels and Solar Electric Pane.

BP Solar 3125J, 125 Watt 12 Volt Nominal Solar Panel
Item Code : 3167
Our Price : $ 620.00
Dollar Per Watt: $ 4.96
Quantity:
.



Shipping Estimate - estimates are for lower 48 US only
Select Your Country:
Enter Your City:
Enter Your ZipCode:

BP Solar-BP 3135J, 125 watt solar panel

High-efficiency photovoltaic module using silicon nitride multicrystalline silicon cells.

Performance
Rated Power (Pmax)r: 125 watts
Power Tolerance: ±3%
Nominal Voltage: 12 volts
Warranty: 25 years

Configuration
J BP 380J Clear Universal frame and standard J-Box
S BP 380S Clear Universal frame with LoPro J-Box and and polarized Multicontact (MC) connectors

Electrical Characteristics:
Maximum Power (Pmax): 125 Watts
Voltage at Pmax (Vmp): 17.4 Volts
Current at Pmax (Imp): 7.2 Amps
Warranted minimum Pmax: 121.3 Watts
Short-circuit Current (Isc): 8.1 Amps
Open-circuit Voltage: 22.0 Volts
Temperature coefficient of Isc: (0.065±0.015)%/°K
Temperature coefficient of Voc: -(80±10)mV/°K
Temperature coefficient of Power: -(0.5±0.05)%/°K
NOCT (Air 20°C, Sun 0.8kW/m², wind speed 1m/s: 47±2°C
Maximum series fuse rating: 15 amp (S) / 20 amps (J)
Maximum system voltage: 600 V (US NEC), 1000V (TUV Rheinland & IEC 61215)

Mechanical Characteristics

S,J Solar Cells : 36 cells (156 x 156 mm) in a 4 x 9 matrix connected in series
S Output cables : RHW AWG #12 (4 mm²) cable with polarized weatherproof DC rated Multicontact connectors; asymmetrical lengths -900mm (-) and 800mm (+)
J Junction box: J-Version junction box with 6 terminal connection block; IP 65, accepts PG 13.5, M20, 1/2" conduit, or cable fittings accepting 6 to 12 mm diameter cable. Terminals accept 8 to 14 AWG² (2.5 to 10 mm) wire.
S,J Diodes IntegraBus^TM technology includes Schottky by-pass diodes integrated into the printed circuit bus.
S,J Construction: Front: High transmission 1/8" (3 mm) tempered glass. Back: White back sheet; Encapsulated: EVA.
S,J Frame: Clear anodized aluminum alloy type 6063T6. Silver universal frame.

Quality and Safety

Manufactured in ISO 9001 certified factories; conforms to European Community Directive 89/33/EEC, 73/23/EEC, 93/68/EEC; certified to IEC 61215
Module power measurements calibrated to World Radiometric Reference through ESTI (European Solar Test Installation at Ispra, Italy)
Framed modules certified by TUV Rheinland as Safety Class II (IEC 60364) equipment for use in systems up to 1000 VDC
Framed modules listed by Underwriter Laboratories for electrical and fire safety (Class C fire rating)
Approved by Factory Mutual Research in NEC Class 1, Division 2, Groups C & D hazardous locations (J version only)

Qualifications Test Parameters
Temperature cycling range: 40°F to 185°F (-40°C to 85°C)
Humidity freeze, damp heat: 85% RH
Static load front and back (e.g. wind): 50 psf (2400 Pa)
Front loading (e.g. snow): 113 psf (5400 Pa)
Hailstone impact: 1" (25 mm) hail at 52 mph (23 m/s)

S,J
Dimensions (LWD): 59.4" x 26.5" x 1.97" (1510 x 674 x 50 mm)
Weight: 26.5 lbs (12.0 kg)

Products

Newsletter

Rebates