Outback Power FLEXware PV12 COMBINER BOX

Store Learn Residential Commercial Installers Support About Us

1.800.810.9939

Site Map

View Cart

Check Out

Store

Outback Power FLEXware PV12 COMBINER BOX

Outback FLEXware PV12 Combiner Box
Item Code : 3578
Our Price : $ 172.00
List Price: ~~$ 199.00~~
You Save: $ 27.00 (13.57 %)
Quantity:



Shipping Estimate - estimates are for lower 48 US only
Select Your Country:
Enter Your City:
Enter Your ZipCode:

OutBack FLEXware FW PV12 Combiner Box

The OutBack Power Systems FLEXware PV combiner series sets the new standard for PV balance-of-system hardware. Ideal for both small or large systems, the FLEXware PV8 and FLEXware PV12 accommodates the over-current protection requirements of your application. From 150VDC breakers for low voltage PV systems, to 600VDC fuse holders for high voltage PV systems, the FLEXware PV Combiner series handles it all.

Designed to survive in outdoor environments, the rainproof, UL type 3R powder coated aluminum chassis can be mounted on a wall, sloped roof or pole. The unique angled negative terminal bus bar design makes wiring fast and easy without the larger output conductors blocking access to the smaller input terminals. Dual output lug terminals are included for up to 2/0 AWG conductors. The tinted flame-retardant polycarbonate deadfront panel creates a clean appearance while preventing accidental contact with the live terminals and is easily removable during installation.

The FLEXware PV Combiner makes it easy to take your installation to the next level.

Holds up to twelve OutBack Power Systems DIN mounted breakers for PV array configurations of 12 to 72 VDC systems with a maximum open circuit voltage of 150 VDC or use eight OutBack Power Systems OBFH "touch safe" type fuse holders for high voltage systems with a maximum open circuit voltage of 600 VDC

Model: FLEXware PV

Description: Outdoor rated powder-coated aluminum PV array combiner box

Includes:

Enclosure
Dual combining bus bars
One terminal bus bar
Two #1/0 AWG set-screw compression type box lug terminals
One #1/0 AWG ground lug

FWPV-12
Enclosure Material: Powder coated aluminum with stainless steel hardware
Mounting Options : Vertical wall mount, pole mount or sloped roof mount to 14 degrees incline (3 in 12 roof pitch)
Enclosure Rating: Outdoor Rainproof, UL Type 3R
Enclosure Security: Padlock hole in chassis and cover for up to 3/8 inch pad lock
Output Terminals: #14 - 2/0 AWG (2.08 - 67.43 mm2) Two box lug terminals included
Number of separate circuits: One or Two Circuits
Number of 150VDC breakers: up to 12 (two groups of six)
Number of 600VDC fuse holders: up to 8 (two groups of four)
Input Terminal: 150VDC Breakers/#14-6 AWG (2.08-13.3 mm²) 600VDC Fuse /#14-10 AWG (2.08-5.26 mm²)
Rated for 15 amp maximum

Shipping Dimensions (H x W x L) 4.3 x 9.5 x 19" (10.9 x 24.1 x 48.3 cm)
Shipping Weight: 7.4 lbs (3.3 kg)

Dimensions (H x W x D) 15.2 x 12.7 x 3.9" (38.7 x 32.2 x 9.9 cm)
Weight: 5.9 lbs (2.7 kg)

Products

Recently Viewed Items

Newsletter

Rebates