Lorentz AC Power Pack for PS-60 and PS-120 Dual Mode
AC-DC converter to power PS600/ PS1200/ EP600 Pump systems from a generator or utility power
Application
The Problem
Some solar pumps may not provide sufficient flow during all conditions, especially in unusually cloudy weather or if sufficient storage is not provided.
The Solution
The LORENTZ AC Power Pack allows the pump to be powered by an AC generator or commercial utility power. The solar array remains connected. If the sun comes out, less power is drawn from the AC source.
A common application is for a portable genset (gasoline generator) to run a well pump. When the generator is stopped (or runs out of fuel) the pump automatically returns to solar power when the sunshine is sufficient. No manual switching is required.
The Power Pack will power the pump to its full capacity. With some systems, it will produce a greater flow rate than you will see with solar power.
Specifications:
AC Input: 115 or 230V (selectable), 47 to 63Hz
AC Input current: 6.4A (115V) or 3.2A (230V)
PV Input Voltage: 48-72 or 96V DC nominal
DC Output: 75V or 110V (selectable)
Overload protection: Internal fuse, 10A
Enclosure: Steel, gasket-sealed, outdoor-rated, hinged front cover with key-lock Must be protected from direct mid-day sun
IP42
Dimensions: 15.7 " x 11.8 " x 5.5 " / 400 mm x 300 mm x 140 mm
Weight: 35 lbs. / 6 kg
|
