Magnum Energy Inverter MS2812

Store Learn Residential Commercial For Installers Support

1.800.810.9939

Site Map

View Cart

Check Out

Support

Store

Magnum Energy Inverter MS2812
Item Code : 1848
Our Price : $ 1,839.00
List Price: ~~$ 2,299.00~~
You Save: $ 460.00 (20.01 %)
Quantity:

Magnum Energy Inverter MS2812, 2000 watt 12 volt pure Sine Wave Inverter

A remote control is HIGHLY RECOMMENDED with every Magnum Inverter so that the inverter features can be modified and error codes recovered.

Optional Remote Control pictured here must be ordered separately

The MS Series Pure Sine Wave Inverter/Charger for Mobile and Off Grid Applications Introducing the MS Series Inverter/ Charger from Magnum Energy - a new pure sine wave inverter designed specifically for the most demanding mobile and off grid applications. The MS Series is powerful, easy-to-use, and best of all, cost effective.

Safe and reliable: The MS Series is ETL listed to the stringent requirements of UL/cUL 458 for mobile use and UL 1741 for off grid installations.

Easy-to-install: Install the MS Series in four easy steps: simply connect the inverter's output to your distribution circuits or electrical panel, connect your shore power cable (AC) to the inverter's easy-to-reach terminal block, connect the batteries, and switch on the power.

Features
The MS Series Inverter/Charger is loaded with features:

Pure sine wave: Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.

Choices: The MS Series comes in three power models and 12 and s24 volt configurations, allowing you to choose the model that is right for you.

Uprgradeable memory: The inverter is designed with Flash programming for easy memory upgrades.

Versatile mounting: Mount the MS Series on a shelf, bulkhead, or even upside down.

Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.

Multiple ports: The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.

Accessible design: The extra large AC access cover with terminal screw block and 360 degree DC connection terminals with covers make this inverter more accessible when it needs to be.

Convenient switches: The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.

Expanded transfer relay: 50 Amp transfer service is available on all models.

Buy with ease: The MS Series is backed by a three-year (36-month) limited warranty.

Accessories and Options:
Remote Control: For convenient finger-tip operation, including the new one-knob programming.

AGS module: Automatically starts and stops your generator based on temperature or battery voltage.

Inverter Specifications
Input battery voltage: 9 to 17 VDC
Nominal AC output voltage: 120 VAC
Output frequency and accuracy: 60 Hz +- 0.005%
Total Harmonic Distortion (THD): <5%
1 msec surge current: 70 amps AC
100 msec surge current: 40 amps AC
5 sec surge power: 3900 real watts
30 sec surge power: 3800 real watts
5 min surge power: 3200 real watts
30 min surge power: 3000 real watts
Continuous power output at 25C: 28000 VA
Rated input battery current: 267 ADC
Inverter efficiency: 88%
Transfer time: 16 msecs
Search Module (with remote): 0.3 ADC
No Load (120 VAC output with remote): 0.2 ADC
Waveform: Pure Sine Wave

Charger Specifications
Continuous output at 25C: 125 ADC
Charger efficiency: 85%
Power Factor: >0.95
Input current at rated output: 18 AC amps

General Features and Capabilities
Transfer relay capability: MS2012, MS2812, MS4024: 2 legs at 30a for 120 V/30 A or 240 V/60 A service
MS2000: 30 A single input
Five stage charging capability: Bulk, Absorb, Float, Equalize, and Battery Saver
Battery temperature compensation: with available temp sensor (battery temp 0 to 50C)
Remote inverter on/off witch: With available pigtail to connect to dry contact
Internal cooling: 0 to 120 cfm variable speed drive using dual 92 mm brushless DC fans
Over-current protection: Yes, with two overlapping circuits
Over-temperature protection: Yes on transformer, MOSFETS, and battery
Conformal coating on PCB's for corrosion protection: yes
Powder coated chassis and top for corrosion protection: yes
Stainless steel fasteners for corrosion protection: yes
Dual AC branch rated output breakers: Optional on the MS2000 and MS2012 - AC breakers in 15 or 20 amp ratings
Listings: ETL listed to UL/cUL 458, UL 1741, CSA C22.2 #107.1-01, meets KKK-A-1822E standard
Warranty: Three years

Environmental Specifications
Operating temperature: -20C to 60C (-4F to 140F)
Non-operation temperature: -40C to 70C (-40F to 158F)
Operating humidity: 0 to 95% RH non condensing

Physical Specifications
Mounting: Shelf (top or bottom up) or bulkhead (vents up)
Max operating altitude: 15,000' / 4570m

Dimension (HWD): 13.75" x 12.65" x 8.0" / 349 x 321 x 203 mm
Weight: 53 lbs / 24 kg

Products

Recently Viewed Items

Newsletter

Rebates