Magnum Energy Inverter MS4448AE 48 volt 120/240 VAC

Home Store Learn

1.800.810.9939

Site Map

View Cart

Check Out

Support

Store

Magnum Energy Inverter MS4448AE 48 volt 120/240 VAC

Magnum Energy Inverter MS4448AE
Item Code : 3025
Our Price : $ 2,080.00
List Price: ~~$ 2,599.00~~
You Save: $ 519.00 (19.97 %)
Quantity:

Magnum Energy Inverter MS4448AE, 4400 Watts 48 Volts 120V/240V

A remote control is HIGHLY RECOMMENDED with every Magnum Inverter so that the inverter features can be modified and error codes recovered.

The MS-AE 120/240V Series Inverter/Charger form Magnum Energy is a pure sine wave inverter designed specifically for the most demanding renewable energy applications. The MS-AE Series is powerful, easy-to-use, and best of all, cost effective.

No stacking required: The unique design of the MS-AE Series can provide 120/240 volt output in one unit, eliminating the need to stack two units together to get 240 volts.

Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger - using 25 to 30% less AC current than standard chargers

Safe and Reliable: The MA-AE Series is ETL listed to the stringent requirements of UL 1741 and CSA STD C22.2 No.107.1-01 for renewable energy installations.

Easy-to-install: Install the MA-AE Series in four easy steps: Simply connect the inverter's output to your distribution circuits or electrical panel, connect your power cable (AC) to the inverter's easy-to-reach terminal block, connect the batteries, and switch on the power.

Features
You asked and Magnum listened.

Pure sine wave Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.

Efficient: The sine wave charger efficiently charges your batteries even at low AC voltage, while the modified sine wave inverter keeps the cost down. Additionally, the battery temperature sensor works with the charger for optimum battery charging.

Choices: The MS-AE Series comes in 24 and 48 volt configuration, allowing you to choose the model that is right for you.

Versatile mounting: Mount the MS-AE Series on a shelf, wall.

Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.

Multiple ports: The MS-AE Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.

Accessible design: The extra large AC access cover with terminal screw block and 360 degree DC connection terminals with covers make this inverter more accessible when it needs to be.

Convenient switches: The MS-AE Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.

Expanded transfer relay: Two legs at 30A per leg transfer service is standard on all models.

Buy with ease: The MA-AE Series is backed by a 24 month limited warranty.

Available Accessories

Battery Monitor Kit
DC Load Disconnect
Remote Control
AGS

Accessories and Options:

Remote Control: For convenient finger-tip operation, including the new one-knob programming.
AGS module: Automatically starts and stops your generator based on temperature or battery voltage.

Specifications
Input battery voltage: 36 to 68 VDC
Nominal AC output voltage: 120/240 VAC split phase
Output frequency and accuracy: 60 Hz +- 0.005%
Total Harmonic Distortion (THD): <5%
1 msec surge current (amps AC): 110
100 msec surge current (amps AC): 75
5 sec surge power (real watts): 8500
30 sec surge power (real watts): 6000
5 min surge power (real watts): 5400
30 min surge power (real watts): 4800
Continuous power output at 25C
Rated input battery current: 105 ADC
Inverter efficiency (peak): 94%
Transfer time: 16 msecs
Search Mode: 0.2 ADC
No Load (120 VAC output): 0.5 ADC
Waveform: Pure Sine Wave

Charger Specifications
Continuous output at 25C: 60 ADC
Charger efficiency: 85%
Power factor: > 0.95
Input current at rated output (AC amps): 17 AAC per leg at 120/240 VAC split phase

General Features and Capabilities
Transfer relay capability: 2 leg at 30A per leg transfer standard on all models
Five stage charging capability: Bulk, Absorb, Float, Equalize, and Battery Saver
Battery temperature compensation: With available temp sensor (battery temp 0 to 50C)
Internal cooling: 0 to 120 cfm variable speed drive using dual 92 mm brushless DC fans
Over current protection: Yes, with two overlapping circuits
Over temperature protection: Yes on transformer, MOSFETS, and battery
Conformal coating on PCB's for corrosion protection: Yes
Powder coated chassis & top for corrosion protection: Yes
Stainless steel fasteners for corrosion protection: Yes
Listings: ETL listed to UL 1741 and CSA STD C22.2 No. 107.1-01
Warranty: Two years

Environmental Specifications
Operating temperature: -20C to 60C (-4F to 140F)
Non-operating temperature: -40C to 70C (-40F to 158F)
Operating humidity: 0 to 95% RH non condensing

Physical Specifications
Dimensions (LWH): 13.75" x 12.65" x 8.0" / 34.9 x 32.1 x 20.3 cm
Mounting: Shelf or wall (no vents on bottom)
Weight: 58 lbs / 26.3 kg
Max operating altitude: 15,000' / 4570 m

Products

Newsletter

Rebates