OutBack PS1 Grid Tie Battery Backup
Introducing the new PS1, a revolution in grid-tie solar with battery backup. Designed with an emphasis on performance, ease of installation, and low maintenance, we have eliminated all concerns about batteries in grid-tie systems.If you are considering adding a grid-tied solar system to your home or business, incorporating battery backup is common sense. The PS1 system performs better than some battery-less inverters. In side-by-side, real-world testing, the PS1 performed within 5% of the kilowatt hour performance achieved by the current industry-leading inverter.All fears about the complexity of grid-tie solar with battery backup are eliminated thanks to our "install ready" design. The PS1 system is a factory-wired solution with a complete ETL listing. The type 3R rainproof construction ensures that there is plenty of flexibility in where you choose to install the PS1.The PS1 system uses sealed AGM-type batteries, eliminating the need for periodic watering. OutBack's advanced charge control algorithm and smart battery management techniques allow for battery life to exceed 10 years in most grid-tie backup applications.The PS1-2500 uses a sealed inverter and is rated at 2500W continuous power; the PS1-3000 uses a vented inverter and is rated at 3000W.
| Specifications |
| AC Input Voltage |
120 VAC 60Hz |
| Continuous Power Rating at 25° C |
2500 Watts AC |
| Maximum Surge Current |
Peak: 70 Amps AC |
|
RMS: 50 Amps AC |
| PV Array Voltage |
Nominal: 48, 60 or 72 VDC |
|
Max: 140 VOC |
| Maximum PV Array Wattage |
3300 Watts STC Rating |
| Listing |
ETL Approval to UL 1741 in Progress |
| Battery Voltage |
48 VDC |
| Energy Storage |
4.0 kWh at 80% Depth of Discharge |
| Typical Inverter Efficiency |
92% |
| Typical System Efficiency |
90% |
| PS1 System Enclosure (HxWxD) |
31.3"x17.25"x12.9" |
| PS1 Battery Enclosure (HxWxD) |
36.25"x17.25"x12.55" |
| Total Shipping Weight (without batteries) |
120 lbs. |
| Enclosure Rating |
Outdoor Rainproof, Type 3R, Wall Mount |
The sytem includes all hardware except batteries and battery box for a battery back up system. To add a solar array to the PS-1 the following equipment is required: PV modules, mounts of the modules, a combiner box, breakers, and wire.
The image shows a PS1-BE battery enclosure box and 4 batteries. These are sold separately.
|
