PSPV Outback Power PV COMBINER BOX

Store Learn Residential Commercial Installers Support About Us

1.800.810.9939

Site Map

View Cart

Check Out

Store

Outback PSPV PV Combiner Box
Item Code : 1189

Discontinued

OutBack PSPV Combiner Box

8/28/08 The PSPV is discontinued in favor of the new FLEXmax PV8 and PV12

OutBack Power Systems now offers a PV array combiner which can be used with a wide variety of PV system designs and module configurations. Can be configured with DC breakers for low voltage systems (under 125 VDC) or touch safe type fuse holders for high voltage systems (up to 600 VDC).The PSPV is designed to provide NEC code compliant over current protection and interconnection of multiple PV panels or sub-arrays into one or more PV arrays for connection to charge controllers or inverter systems. The PSPV is easily field configured to match your PV system design and ampacity requirements.

Shown here with twelve 125 VDC PV breakers and second TBB option.The PSPV Power System PV Combiner provides series over current protection of PV module circuits allowing NEC compliant installation. Includes space for up to twelve 125 VDC rated breakers or eight 600 VDC rated fuse holders (2 strings of 4 or 1 string of 7). Includes two positive output bus bars with two #1/0 terminals for single or dual output circuits. The type 3R outdoor rainproof enclosure can be mounted vertically or inclined to 14 degrees (3 in 12 pitch).

Enclosure only without breakers or fuse holders.
Standard Features and Components

Outdoor, rainproof powder coated aluminum enclosure can be installed on vertical or sloped surfaces or pole mounted.
Snap in DIN rail mounting spaces for up to twelve 125 VDC rated OutBack PV breakers. PV Breakers are hydraulic-magnetic type and are not affected by high ambient temperatures. 10 year warranty on the PV breakers. For 12, 24, 48 and 60 VDC systems with PV array open circuit voltages up to 125 VDC. Load break rated.
Also available with touch safe type midget fuse holders for high voltage systems up to 600 VDC
Dual positive breaker combiner bus bars- can be installed to provide one or two separate PV output circuits. An additional Terminal Bus Bar (TBB) will need to be purchase to have two separate PV output circuits.
PV negative terminal bus bar with mounting holes for an additional TBB
#1/0 AWG set-screw compression type box lug terminals for output wiring- accepts bare cable
Four 3/4 and 1 inch conduit knockouts- one on the bottom, back and each side- enough space provided on bottom and back to allow up to a 2 inch conduit punch for larger cabling. Side knockouts cna be punched out to 1 1/4 inches.
Eight 1/2 inch knockouts on bottom for PV module or sub-array input conduits or strain reliefs
#1/0 AWG ground lug- can be mounted either on the inside or outside surface
For negative or positive ground PV systems

Shipping Dimensions: 10" x 4" x 14" (254 x 102 x 356 mm)
Shipping Weight: 6 lbs (2.73 kg)

Dimensions (HxWxD): 13.1" x 9.2" x 3.5" (333 x 234 x 89 mm)

Products

Recently Viewed Items

Newsletter

Rebates