Solar Boost 2000E MPPT Charge Controller 25 Amp, 12V
Patented Maximum Power Point Tracking (MPPT) technology allows Solar Boost 2000E to increase charge current up to 30% or more compared to conventional charge controllers. Don't waste money by throwing PV power away! Get the power you paid for with a Solar Boost charge controller.
The Solar Boost 2000E provides a precision Multi-stage Pulse Width Modulation (PWM) charge control system to ensure the battery is properly and fully charged, resulting in enhanced battery performance with less battery maintenance. An equalize function is also included to periodically condition liquid electrolyte lead-acid batteries.
A built in LCD digital display monitors solar charge performance. The display shows battery voltage, solar panel current and output charge current. You can actually see current boost working by noting the difference between solar panel current and output charge current. A charge status LED indicates the present charge mode, and shows when the battery has become fully charged.
Features
- Patented MPPT technology increases charge current up to 30% or more!
- 12 Volt/25 Amp rating supports medium sized solar module arrays
- Multi-stage PWM Charge control improves battery performance & life
- Electronic current limit prevents overload or nuisance fuse blow
- LCD Digital display monitors pv charge performance
- Durable powder coat finish & conformal coated electronics resist corrosion
- Available temperature compensation further improves battery performance & life
- Fully protected against excess current, temperature, transient voltage & polarity
- Full 36 month limited warranty, optional extended coverage available
How Do Solar Boost Controllers Increase Charge Current?
Solar Boost controllers increase charge current by operating the PV module in a manner that allows the module to produce all the power it is capable of. A conventional charge controller simply connects the module to the battery when the battery is discharged. When the 75W module in this example is connected directly to a battery charging at 12 volts its power production is artificially limited to about 53 watts. This wastes a whopping 22 watts or nearly 30% of the available power!
Patented MPPT technology used in Solar Boost controllers operates in a very different fashion. The Solar Boost controller continually calculates the module's maximum power voltage, in this case 17 volts. It then operates the modoule at its maximum power voltage to extract maximum power. The higher power extracted from the module is then provided to the battery in the form of increased charge current. In conditions where extra PV power is not available, Solar Boost controllers will operate as a conventional controller with very low voltage drop.
The actual charge current increase you will see varies primarily with module temperature and battery voltage. In comfortable temperatures, current increase typically varies between 10 to 25%, with 30% or more easily achieved with a discharged battery and cooler temperatures. What you can be sure of is that Solar Boost charge controller will deliver the highest charge current possible for a given set of operating conditions.
Sizing Recommendations for MPPT Charge Controllers:
Please remember that the amperage rating for MPPT Charge Controllers is based on the output current to the battery. The Charge Controller should be sized so that it equals approximately 70% of the incoming PV array amperage. For example, the input array amperage on a Solar Boost 50 should be limited to 35 amps in order to obtain the maximum boosting advantage to the battery.
Shipping Weight 2 lbs. (0.91 kg)
Shipping Dimensions: 5" x 9" x 3" (127 x 228.6 x 76.2 mm)
Dimensions (HxWxD): 4 5/8" x 6 3/8" x 1 7/8" (117.5 x 161.9 x 47.6 mm)
|
