What Makes Staber Different Compared to Traditional Washers? Although it looks like a standard washer from the outside, Staber operates differently on the inside. Using a patented inner/outer tub design, Staber's six-sided inner tub rotates inside a stationary half of an eight-sided outer tub. As the shape between the inner and outer tub changes while the inner tub rotates, a passive pumping action is created between the two tubs which gently pumps water through the holes of the inner tub and through your laundry.

Accent Colors

Accent colors include an extended two year warranty on top of the one year full warranty. They also include sound deadening insulation and engineered polymer braid inlet hoses.

Key Benefits of a Staber Washing Machine vs. Traditional Agitator Washers:

• Uses 66% less water (great for wells & septic systems) and 75% less detergent. Typically uses 15 gallons of water per load vs. 45 gallons!
• Uses 50% less energy because of heating less hot water; can save you over $300 annually if you currently do just 8 loads per week. Heat an average of 3 gallons of hot water vs. 12 gallons of hot water per load.
• Uses around 135 watt-hours of electricity per load compared to 600 watt-hours to use a traditional agitator washer.
• Can pay for itself within two years at 8 loads per week
• Clothes last around 30% longer because of using a gentle tumbling action as opposed to using a harmful agitator that can shred your laundry.
• Spins like a front loader, but without a leaking front seal
• Reduce drying time by about 30% due to faster spin speeds (and save more energy)
• Designed to be user serviceable. Total front access to parts to reduce maintenance expenses.
• Patented tub design forces water through clothes to clean more effectively
• Can hold up to 50% more laundry than traditional agitator washers
• Fewer moving parts means less maintenance
• Longer life expectancy; expected to last 20+ years with average residential use compared to 10 years with a standard top load agitator washer
• Staber is a very durable, commercial-quality washer for the home, as opposed to a standard domestic residential washer
• Uses durable stainless steel inner and outer tubs, as opposed to a plastic outer tub
• Has a heavy-duty four strut suspension to prevent the washer from walking in the spin cycle.
• Has two re-greasable bearings per shaft, supported on the front and the back of the tubs for greater durability over time and can prevent premature bearing failure.
• Over 28 years of experience in the laundry industry provides Staber with the knowledge to produce the best-built and most efficient washer available

• are being affected by increasing utility rates
• do a lot of laundry (at least 8 loads per week)
• use a well for your water supply
• use alternative power sources instead of regular electricity
• have septic system problems
• are looking at front loaders but do not want the inconvenience of bending over to load and unload
• would simply like to save over $300 annually in resources (at the national average of 8 loads per week for a family of 3)