| |
|
Please click on Description tab
|
Staber HXW2404 Washing Machine
Call Affordable Solar at 1-800-810-9939 x1 for Staber's lead time.
Made in Groveport, Ohio, the Staber model HXW2404 is a commercial-quality washer for the home. It features a stainless steel base (the square frame the machine is built upon), and the control panel decal has a brushed stainless appearance with black knobs. It includes stainless steel inner and outer tubs for better durability. It can save the average family of 3 that does 8 loads per week around $300 each year by using less water, energy, and detergent compared to traditional top load agitator washers.
What Makes Staber Different Compared to Traditional Washers?
Although it looks like a standard washer from the outside, Staber operates differently on the inside. Using a patented inner/outer tub design, Staber's six-sided inner tub rotates inside a stationary half of an eight-sided outer tub. As the shape between the inner and outer tub changes while the inner tub rotates, a passive pumping action is created between the two tubs which gently pumps water through the holes of the inner tub and through your laundry.
Key Benefits of a Staber Washing Machine vs. Traditional Agitator Washers:
- Uses 66% less water (great for wells & septic systems) and 75% less detergent. Typically uses 15 gallons of water per load vs. 45 gallons!
- Uses 50% less energy because of heating less hot water; can save you over $300 annually if you currently do just 8 loads per week. Heat an average of 3 gallons of hot water vs. 12 gallons of hot water per load.
- Uses around 135 watt-hours of electricity per load compared to 600 watt-hours to use a traditional agitator washer.
- Can pay for itself within two years at 8 loads per week
- Clothes last around 30% longer because of using a gentle tumbling action as opposed to using a harmful agitator that can shred your laundry.
- Reduce drying time by about 30% due to faster spin speeds (and save more energy)
- Spins like a front loader, but without a leaking front seal
- Patented tub design forces water through clothes to clean more effectively
- Can hold up to 50% more laundry than traditional agitator washers
- Designed to be user serviceable. Total front access to parts to reduce maintenance expenses
- Fewer moving parts means less maintenance
- Longer life expectancy; expected to last 20+ years with average residential use compared to 10 years with a standard top load agitator washer
- Staber is a very durable, commercial-quality washer for the home, as opposed to a standard domestic residential washer
- Uses durable stainless steel inner and outer tubs, as opposed to a plastic outer tub
- Has a heavy-duty four strut suspension to prevent the washer from walking in the spin cycle.
- Has two re-greasable bearings per shaft, supported on the front and the back of the tubs for greater durability over time and can prevent premature bearing failure.
- Over 28 years of experience in the laundry industry provides Staber with the knowledge to produce the best-built and most efficient washer available
The Staber energy efficient washer will be very helpful if you:
- are being affected by increasing utility rates
- do a lot of laundry (at least 8 loads per week)
- use a well for your water supply
- use alternative power sources instead of regular electricity
- have septic system problems
- are looking at front loaders but do not want the inconvenience of bending over to load and unload
- would simply like to save over $300 annually in resources (at the national average of 8 loads per week for a family of 3)
Call 1-800-810-9929 for a free shipping quote.
|
Weight: 175 lbs / 79.54kg
Dimensions: WxDxH: 27" x 26" x 42" / 686 x 661 x 1067mm
Shipping Weight: 240 lbs. / 109.09kg
Shipping Dimensions: WxDxH: 30" x 32" x 44" / 762 x 813 x 1118mm
Call 1-800-810-9929 for a free shipping quote.
|
Please click on Description tab |
|
|
|
