|
|
Magnum Energy MM1524AE Inverter
- Magnum Energy Inverter MM1524AE, 1500 Watts 24 Volts, 35 amp PFC Charger
A remote control is HIGHLY RECOMMENDED with every Magnum Inverter so that the inverter features can be modified and error codes recovered.
The MM-AE Series Inverter/Charger for Renewable Energy Applications is the cost effective solution for smaller power needs.
Power Factor Corrected (PFC) Charger:
Our PFC charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger - using only 7.5 amps per 50 amps versus 12.5 amps used by standard chargers.
Attractive Styling:The modern, hourglass case, paired with the die cast aluminum base combines form with functions, creating an attractive unit that uses its base as a heat sink for superior high temperature operation.
Features
You asked and Magnum listened. The MM-AE Series Inverter/Charger is loaded with features.
Standard transfer relay: The standard 20 amp transfer relay will pass AC power through the inverter when using grid or generator power.
Versatile Mounting Mount the MM-AE Series on a shelf, bulkhead, or even upside down.
Fan cooled: The MM-AE Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.
Low battery protection: If your battery voltage reaches below the cut-out setting the MM-AE Series will automatically shut down.
High battery protection: If your battery voltage reaches over the cut-out setting the MM-AE Series will automatically shut down.
Current overload protection:The MM-AE Series will automatically shut down if its output wattage is exceeded or it detects a short in the wiring saving the unit from costly damage.
Convenient switches: The MM-AE Series comes with an on/off front-mounted switch with an easy-to-read LED indicator.
Circuit breaker protection: Every model comes with built in input and output circuit breakers for ease of installation
Battery temp sensor: The standard battery temp sensor monitors temperatures from 0 to 50C
But with ease: The MM-AE Series is backed by a two-year (24 month) parts and labor warranty.
Accessories and Options:
Remote Control: The optional ME-RC and MM-RC remotes are available for the MM-AE Series. A four wire phone jack comes standard with the unit to connect the remote.
Inverter Specifications
Input battery voltage: 18 to 32 VDC
Nominal AC output voltage: 120 VAC +-5%
Output frequency and accuracy: 60 Hz +- 0.005%
1 msec surge current: 45 amps AC
100 msec surge current: 24 amps AC
5 sec surge power: 2650 real watts
10 sec surge power: 2575 real watts
30 sec surge power: 2500 real watts
5 min surge power: 2350 real watts
30 min surge power: 1900 real watts
Continuous power output at 25C: 1500 VA
Continuous current output at 25C (with 1.0 PF)
Rated input battery current: 70 ADC
Inverter efficiency: 91%
Transfer time: 16 msecs
Search Module: 0.12 ADC
No Load (120 VAC output): 0.63 amps DC
Waveform: Modified Sine Wave
Charger Specifications
Continuous output at 25C: 35 ADC
Charger efficiency: 88%
Power Factor: >0.95
Input current at rated output: 9 AC amps
General Features and Capabilities
Transfer relay capability: 20 amps AC (input current for charging and pass through)
Battery temperature compensation: Yes, standard temp sensor (battery temp 0 to 50C)
Remote available (optional): Yes, MM-RC, ME-RC
Internal cooling: 0 to 59 cfm variable speed
Over-current protection: Yes, with two overlapping circuits
Over-temperature protection: Yes on transformer, and MOSFETS
On/Off with status indicator: Yes, front mounted and easily accessible
Low battery cutout: 10 or 20 VDC, adjustable on most modules with the ME-RC remote
AC output and input: Hardwire
Output circuit breaker: 12 amp switchable
Input circuit breaker: 16 amps
Listings: NA
Warranty: Two (2) years
Environmental Specifications
Operating temperature: -20C to 60C (-4F to 140F)
Non-operation temperature: -40C to 70C (-40F to 158F)
Operating humidity: 0 to 95% RH non condensing
Physical Specifications
Mounting: Shelf (top or bottom up) or bulkhead (vents up)
Max operating altitude: 15,000' (4570m)
Construction: ABS plastic top and cast aluminum bottom
Dimension (HWD): 16.6" x 8.4" x 4.7" (420 x 210 x 120 mm)
Weight: 20 lb (9 kg)
- No information available
-
Length: 16.6"
Width: 8.4"
Height: 4.7"
Weight: 20 lbs
-
0
|
|
|
|
