BP Solar 380J, 80 Watt 12 Volt Nominal Solar Panel

Average Rating: 0


  • BP Solar-BP 380J, 80 watt solar panel

    High-efficiency photovoltaic module using silicon nitride multicrystalline silicon cells.

    Performance
    Rated Power: 80 watts
    Power Tolerance: ±5%
    Nominal Voltage: 12 volts
    Warranty: 25 years

    Configuration
    J BP 380J Clear Universal frame and standard J-Box
    L BP 380L Unframed laminate version of BP 380S
    S BP 380S Clear Universal frame with WireholdTM J-Box and and polarized Multicontact (MC) connectors

    Electrical Characteristics:
    Maximum Power (Pmax): 80 Watts
    Voltage at Pmax (Vmp): 17.6 Volts
    Current at Pmax (Imp): 4.5 Amps
    Warranted minimum Pmax: 76 Watts
    Short-circuit Current (Isc): 4.8 Amps
    Open-circuit Voltage: 21.1 Volts
    Temperature coefficient of Isc: (0.065±0.015)%/K
    Temperature coefficient of Voc: -(80±10)mV/K
    Temperature coefficient of Power: -(0.5±0.05)%/K
    NOCT (Air 20C, Sun 0.8kW/m2, wind speed 1m/s: 47±2C
    Maximum series fuse rating: 15 amp (380S 380L) / 20 amps (BP 380J)
    Maximum system voltage: 600 V (US NEC), 1000V (TUV Rheinland & IEC 61215)

    Mechanical Characteristics
    • S,L,J Solar Cells : 36 cells (125 x 125 mm) in a 4 x 9 matrix connected in series
    • S,L Output cables : RHW AWG #12 (3.3 mm2) cable with polarized weatherproof DC rated Multicontact connectors; asymmetrical lengths -900mm (-) and 800mm (+)
    • J Junction box: J-Version junction box with 6 terminal connection block; IP 65, accepts PG 13.5, M20, 1/2" conduit, or cable fittings accepting 6 to 12 mm diameter cable. Terminals accept 8 to 14 AWG2 (2.5 to 10 mm) wire.
    • S,J,L Diodes IntegraBusTM technology includes Schottky by-pass diodes integrated into the printed circuit bus.
    • S,L,J Construction: Front: High transmission 1/8" (3 mm) tempered glass. Back: White back sheet; Encapsulated: EVA.
    • S,J Frame: Clear anodized aluminum alloy type 6063T6. Silver universal frame.

    Quality and Safety
    • Manufactured in ISO 9001 certified factories; conforms to European Community Directive 89/33/EEC, 73/23/EEC, 93/68/EEC; certified to IEC 61215
    • Module power measurements calibrated to World Radiometric Reference through ESTI (European Solar Test Installation at Ispra, Italy)
    • Framed modules certified by TUV Rheinland as Safety Class II (IEC 60364) equipment for use in systems up to 1000 VDC
    • Framed modules listed by Underwriter Laboratories for electrical and fire safety (Class C fire rating)
    • Approved by Factory Mutual Research in NEC Class 1, Division 2, Groups C & D hazardous locations (J version only)
    Qualifications Test Parameters
    Temperature cycling range: 40F to 185F (-40C to 85C)
    Humidity freeze, damp heat: 85% RH
    Static load front and back (e.g. wind): 50 psf (2400 Pa)
    Front loading (e.g. snow): 113 psf (5400 Pa)
    Hailstone impact: 1" (25 mm) hail at 52 mph (23 m/s)

    S,J
    Dimensions (LWD): 47.60" x 21.14" x 1.97" (1209 x 537 x 50 mm)
    Weight: 16.94 lbs (7.7 kg)

    L
    Dimensions (LWD): 47.1" x 20.9" x 0.75" (1197 x 530 x 19 mm)
    Weight: 13.4 lbs (6.1 kg)
  • No information available
  • Length: 47.6"
    Width: 21.14"
    Height: 1.97"
    Weight: 17 lbs