SolarWorld SW235, 235W Solar Panel
- SolarWorld SW235, 235 Watt 20 Volt Nominal PV Module
SW 235 mono
High-quality, high performance, and high reliability – the Sunmodule Plus® is designed and built for long-term yield stability and ease of use.
Every module is factory flashed at standard test conditions (STC) to determine the power output and then sorted in 5 watt increments. Only modules with a flashed power that is greater than or equal to the nameplate rated power are delivered. Flash report data is provided with every order.
The proven design of the patented low profile Sunbox junction box, has been installed on over 4,000,000 modules. Integrated by-pass diodes and sealed welded connections ensure reliability and eliminate failures resulting from exposure to the elements. The molded fins on the exterior housing dissipate heat quickly to
maximize power output.
The patented box channel frame design provides extraordinary stiffness in bending and torsion. The laminate with 4mm glass is set deep in the frame channel and secured with precision applied adhesive. The frame is assembled by press fit to maximize strength and longevity. The result is an extremely robust package that can
be mounted in any orientation and can withstand static loads of up to 113 psf.
SolarWorld provides a 5-year workmanship warranty* and 25-year linear performance guarantee.*
*See warranty statement for details.
Performance under standard test conditions
Maximum power (Pmax): 235 Watts
Open circuit voltage (Voc): 37.5 volts
Maximum power point voltage (Vmpp): 30.3 volts
Short circuit current (Isc): 8.19 amps
Maximum power point current (Impp): 7.77 amps
Performance at 800 W/m2, NOCT, AM 1.5
Maximum power (Pmax): 171 Watts
Open circuit voltage (Voc): 34 volts
Maximum power point voltage (Vmpp): 27.5 volts
Short circuit current (Isc): 6.60 amps
Maximum power point current (Impp): 6.22 amps
Minor reduction in efficiency under partial load conditions at 25°C, at 220 W/m2, 95% (±3%) of the STC efficiency (1000 W/m2) is achieved.
Cells per module: 60
Cell type: Monocrystalline silicon
Cell dimensions: 6.14" x 6.14" (156 x 156 mm)
TC Isc: 0.042 %/°K
TC Voc: -0.33 %/°k
TC Pmax: -0.45 %/°K
System integration parameters
Maximum system voltage SC II: 1000 VDC
Maximum system voltage USA NEC: 600 VDC
Maximum series fuse rating: 15 amps
Maximum reverse current: Do not apply external voltages larger then Voc to the module
Power tolerance: ±3%
Junction Box: IP 65
Connector: MC type 4
Dimensions (LWH): 65.94" x 39.41" x 1.34" (1675 x 1001 x 34 mm)
Weight: 48.5 lbs (22 kg)
Safety class II
Sunmodules are manufactured in ISO 9001:2000 certified facilities.
Made in USA
Due to size, these panels must ship via freight. Call or email our shipping department for a quick freight quote!!! 1-800-810-9939 or firstname.lastname@example.org
- No information available
Weight: 48.5 lbs