OutBack MX60 MPPT Charge Controller
  • Item Code: 1326

  • Installers call for Wholesale pricing

  • Your Price: Call For Price
  • List Price: $649.00
  • You Save:

Average Rating: 0


  • OutBack MX60 60 amp Charge Controller

    8/15/08 OutBack is discontinuing the MX60 for the new FLEXware 60 Charge Controller.

    Rated for up to 60 amps of DC output current, the OutBack MX60 can be used with battery systems from 12 to 60 vdc with a PV open circuit voltage as high as 140 voc. The MX60's set points are fully adjustable to allow use with virtually any battery type, chemistry, and charging profile.The OutBack MX60 allows you to use a higher output voltage PV array with a lower battery voltage - such as charging a 24 vdc battery with a 48 vdc PV array. This reduces wire size and power loss from the PV array to the battery location while maximizing the performance of you system and saving you money!The OutBack MX60 comes standard with an easy to use and understand display. The four line, 80 character, backlit LCD display is used for programming and monitoring of the system's operation including built-in Data Logging with 64 days of memory.

    Outback Charge Controller and Accessories Sizing Recommendations for MPPT Charge Controllers:
    Please remember that the amperage rating for MPPT Charge Controllers is based on the output current to the battery. The Charge Controller should be sized so that it equals approximately 80% of the incoming PV array amperage. For example, the input array amperage on an MX60 should be limited to 42 amps in order to obtain the maximum boosting advantage to the battery

    SPECIFICATIONS
    MX60
    Output Current Rating 60 amps DC Maximum at 12, 24 or 48 VDC
    Nominal Battery Voltage 12, 24, 32, 36, 48, 54 or 60 VDC (programmable)
    PV Open Circuit Voltage 125 VDC Maximum
    Standby Power Consumption Less than 1 watt typical
    Charging Regulation Methods Five Stage: Bulk, Absorption, Float, Silent, Equalization
    Voltage Regulation Setpoints 13 - 80 VDC
    Equalization Voltage Adjustable 1.0 to 5.0 VDC above Bulk Setpoint
    Temperature Compensation Programmable slope -2.0mV/oC/Cell to -5.0mV/oC/Cell
    Voltage Step-Down Capability Can charge a 12 or 24 VDC battery from a 48V nominal PV array
    Power Conversion Efficiency 99.1% @ 40 amps Output 97.3% @ 60 amps Output
    Digital Display 4 line 80 character backlit LCD Display
    Remote Interface RJ 45 Modular Connector CAT 5 Cable 8 wire
    Operating Temperature Range -40 to 60°C Power derated above 25°C
    Environmental Rating Indoor Type 1
    Conduit Knockouts Two 3/4 - 1” on the back; One 1” - 1 1/2 “ on each side; Two 1” - 1 1/2” on the bottom
    Warranty Two years parts and labor Optional Extended Warranty
    Dimensions (HxWxD) 14.5 “ x 5.75” x 5.75” (368 x 146 x 146 mm)
    Shipping Dimensions(HxWxD) 17.75” x 10” x 7” (451 x 254 x 178 mm)
    Shipping Weight 12 lbs. (5.4 kg)
  • No information available
  • Length: 18"
    Width: 10"
    Height: 7"
    Weight: 14 lbs