|
|
Morningstar SunSaver SS-MPPT-15L, 12/24V Charge Controller

- MorningStar SunSaver SS-MPPT-15L Charge Controller, MPPT, 12/24 Volts, 15 amps, Low Voltage Cut Off
Morningstar's NEW SunSaver MPPT™ Controller is Now Available!
Morningstar is pleased to announce its latest product release, the SunSaver MPPT solar controller with TrakStar Technology™. The SunSaver MPPT is an advanced maximum power point tracking (MPPT) battery charger for off-grid photovoltaic (PV) systems up to 400 watts.
The controller (15 amps at 12/24 volts) features a smart tracking algorithm that maximizes the energy harvest from the PV. This product also provides load control to prevent over discharge of the battery.
The SunSaver MPPT enables the use of high voltage and thin film modules for off-grid PV battery charging. In addition, the controller provides a means to use up to a 36V array to charge a 24V or 12V battery.
This product is well suited for both professional and consumer PV applications. Its charging process has been optimized for long battery life and improved system performance. The SunSaver MPPT is epoxy encapsulated for environmental protection and may be adjusted via on-board switches or PC connection.
Electrical
- Peak Efficiency: 97.5%
- Nominal battery Voltage: 12 or 24 Volts
- Max. battery Current 15 amps
- Battery Voltage Range 7 to 36 volts
- Max. PV Open Circuit Voltage 75 volts
- Nominal Max. PV Input 12 volts: 200 Watts
- Nominal Max. PV Input 24 volts: 400 Watts
- Output Rating 15 amps load control
- Self Consumption: 0.035 amps
- Transient Surge Protection: 4 x 1500 watts
Environmental
- Operating Temperature: -40°C to 60°C
- Storage Temperature: -55°C to 100°C
- Humidity: 100% non-condensing
- Tropicalization: Epoxy encapsulation Conformal coating Marine rated terminals
Electronic Protections
- PV: Overload, Short Circuit, High Voltage
- Load: Overload, Short Circuit
- Reverse Polarity: Battery, PV and Load
- Lightning and Transient Surges
- High Temperature
- Reverse Current at Night
Battery Charging
- Battery Types; Gel, Sealed, AGM, Flooded
- 4 Stage Charging: Bulk, absorption, float, equalize (optional)
- Temperature Compensation:
- Coefficient: -5 mV/°C / cell (25°C ref)
- Range: -30°C to 60°C
- Set points: Absorption, float, equalize
Mechanical
- Dimensions (WLH): 6.6" x 2.5" x 2.9" (169 x 64 x 73 mm)
- Weight: 1.3 lbs (0.60 kg)
- Power Terminal: #6 AWG (16 mm2)
- Enclosure: Die cast aluminum with plastic cover
Certifications
- CE Compliant
- RoHS Compliant
- Manufactured in a certified ISO 9001 facility
Warranty
Five year warranty period. Contact MorningStar or your authorized distributor for complete terms
Options
- RM-1 Remote Meter
- Solar array voltage
- Battery: voltage, amp-hours, min/max voltage since last re-set, watts
- Load: status, amp-hours, amps
- Temperature (°C or °F): at meter, at battery with remote temp sensor
- Self-Diagnostics: list of any faults or alarms to simplify troubleshooting
- Data Logging: daily operating history of the above parameters for the past 30 days
- Remote Temperature Sensor
- PC MeterBus Adapter (4/28/08 Not released yet.)
- DIN Rail Mounting Clips (4/28/08 Not released yet.)
- No information available
-
Length: 6.6"
Width: 2.5"
Height: 2.9"
Weight: 1.6 lbs
-
0
|
|
|
|