SunSaver 10L-12V Charge Controller
The MorningStar SunSaver line of controllers (8 models in
all) have built-in temperature compensation, they are epoxy encapsulated, but
are not outdoor rated since they have an exposed front mounted 7 position
terminal strip. Units are available for 12 or 24V systems ranging in amperage
capacity from 6-20 amps. The regulating voltage is adjustable for sealed or
flooded batteries by simply removing/installing an included metal jumper
between terminals 6 and 7.
A green "charging" LED is standard on all
SunSaver units while the units with the optional low voltage disconnect (LVD)
for a DC load also have a red LED to indicate when the load has been
disconnected to prevent the battery from being over discharged. Each terminal
can accept up to two #10 AWG wires.
Dimensions are 6" x 2.2" x 1.3"
Weighs 8 oz.
Morningstar’s SunSaver is the world’s leading small solar
controller for both professional and consumer applications.
SunSaver's Techonology Provides:
PWM Battery Charging
Consistent High Quality
The SunSaver’s advanced design delivers outstanding
performance and value. The SunSaver’s low cost is made possible by
Morningstar’s unique approach to design and manufacturing:
ISO 9002 quality programs
Latest power electronic technologies
Latest control and logic technologies
High volume manufacturing
Eight versions available 12 and 24 volts 6, 10
and 20 amps 100% solid state Series design (not shunt) True 0 to 100% PWM duty
cycle Setpoint accuracy to 35 mV Rated for 25% overloads Fully encapsulated in
epoxy potting Marine rated terminals / anodized case Temperature compensation
Sealed / Flooded battery select No need to derate Parallel for 40 amps or more
Green charging / Red LVD indicators Shipping weight: 1 lbs. / 0.46 kg Shipping
Dimensions (WLH): 2.75" x 7" x 1.5" / 64 x 178 x 38 mm