OutBack FLEXmax FM60-150V MPPT Charge Controller

  • Item Code: 3508

  • Installers call for Wholesale pricing

  • Your Price: $629.16
  • List Price: $749.00
  • You Save:
 

Average Rating: 0


  • OutBack FLEXmax 60 amp Charge Controller

    FLEXmaxtm
    OutBack Power, based out of Arlington,WA and founded in 2001, is an off-grid inverter manufacturer. By keeping their focus specifically on battery based systems, they have become a leader and innovator in this type of application. Continuous Maximum Power Point Tracking Charge Controllers

    • Increases PV Array Output by up to 30%
    • Advanced Continuous Maximum Power Point Tracking
    • Full Power Output in Ambient Temperatures up to 104°F (40C)
    • Battery Voltages from 12 VDC to 60 VDC
    • Fully Output Network Integrated and Programmable
    • Programmable Auxiliary Control Output
    • Built-in 128 days of Data Logging
    • Standard 5 Year Warranty
    The FLEXmax family of charge controllers is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from OutBack Power Systems. The innovative FLEXmax MPPT software algorithm is both continuous and active, increasing your renewable energy yield up to 30% compared to non-MPPT controllers. Thanks to active cooling and intelligent thermal management cooling, the FLEXmax charge controllers can operate at their full maximum current rating, 60 Amps or 80 amps respectively, in ambient temperatures as high as 104°F (40°C).

    Included in all of the FLEXmax Charge Controllers are the revolutionary features first developed by OutBack Power, including support for a wide range of nominal battery voltages and the ability to step-down a high voltage solar array to recharge a low voltage battery. A built-in back lit 80 character display shows status information and logged system performance data for the last 128 days at the touch of a button. The integrated OutBack network communications allow the FLEXmax series charge controller to be remotely programmed and monitored via a MATE system display and provides unrivaled complete system integration.

    FLEXmax MPPT Charge Controllers are the only choice when you demand a high performance, efficient and versatile charge controller for your advanced power system.

    FM80 MPPT Charge Controller Specifications
    Nominal Battery Voltages: 12, 24, 36, 48, or 60 VDC (Single model - selectable via field programming at start-up)
    Maximum Output Current: 60 amps @ 104° F (40°C) with adjustable current limit
    Maximum Solar Array STC Nameplate
    • 12 VDC 900 Watts
    • 24 VDC 1800 Watts
    • 48 VDC 3600 Watts
    • 60 VDC 4500 Watts
    NEC Recommended Solar Array STC Nameplate
    • 12 VDC systems 750 Watts
    • 24 VDC systems 1500 Watts
    • 48 VDC systems 3000 Watts
    • 60 VDC Systems 3750 Watts
    PV Open Circuit Voltage (VOC)
    • 150 VDC absolute maximum coldest conditions
    • 145 VDC start-up and operating maximum
    Standby Power Consumption: Less than 1 Watt typical
    Power Conversion Efficiency: 98.1% @ 60 Amps in at 48 VDC System voltage - Typical
    Charging Regulation: Five Stages: Bulk, Absorption, Float, Silent and Equalization
    Voltage Regulation Set points: 10 to 60 VDC user adjustable with password protection
    Equalization Charging: Programmable Voltage Set point and Duration - Automatic Termination when completed
    Battery Temperature Compensation: Automatic with optional RTS installed / 5.0 mV per °C per 2V battery cell
    Voltage Step-Down Capability: Can charge a lower voltage battery from a higher voltage PV array - Max 150 VDC input

    Programmable Auxilary Control Output: 12 VDC output signal which can be programmed for different control applications (Maximum of 0.2 amps DC)
    Status Display: 3.1" (8 cm) back lit LCD screen - 4 lines with 80 alphanumeric characters total
    Remote Display and Controller: Optional Mate or Mate2 with RS232 Serial Communications Port
    Network Cabling: Proprietary network system using RJ 45 Modular Connectors with CAT 5e Cable (8 wires)
    Data Logging
    • Last 128 days of Operation
    • Amp Hours
    • Watt Hours
    • Time in Float
    • Peak Watts
    • Amps
    • Solar Array Voltage
    • Max Battery Voltage
    • Min Battery Voltage
    • Absorb for each day along
    • Total Accumulated Amp Hours
    • Total kW Hours of production
    Hydro Turbine Applications: Consult factory for approved Turbines
    Positive Ground Applications: Requires two Pole Breakers for switching both positive and Negative Conductors on both Solar Array and Battery Connections (HUB-4 and HUB-10 can not be used for use in positive ground applications)
    Operating Temperature Range: -40° to 60° C (Power capacity of the controller is automatically derated when operated above 40° C)
    Environmental Rating: Indoor Type 1
    Conduit Knockouts
    • One 1" (35mm)on the back
    • One 1" (35mm) on the left side
    • Two 1" (35mm) on the bottom
    Warranty: Standard 5 year / Available 10 Year

    Weight - Unit: 11.65 lbs (5.3 kg)
    Weight - Shipping: 14.55 lbs (6.4 kg)
    Dimensions - Unit (H x W x D) 13.5 x 5.75 x 4" (40 x 14 x 10 cm)
    Dimensions - Shipping: 18 x 11 x 8" (46 x 30 x 20 cm)
    Options: Remote Temperature Sensor (RTS), HUB 4, HUB 10, MATE, MATE 2
    Menu Languages: English & Spanish
  • No information available
  • Length: 19"
    Width: 10"
    Height: 8"
    Weight: 15.75 lbs