Xantrex Link 10 Standard Meter (Emeter)
2/17/09 Xantrex has discontinued the Link 10 Emeter
84-2016-01 (Link 10 Standard)
Provides Battery Status Information At-A-Glance
The Link 10 Standard Battery bank monitor includes a 500 amp shunt (formerly called the Emeter). For single battery banks only.
Link 10 uses sophisticated microprocessor technology to provide complete battery status information for one battery bank. Simple and easy-to-use multicolor displays show volts, amps, amp hours consumed, and operating time remaining. The Link 10 allows you to select Automatic, Sleep and Scanning modes and automatically calculate and display charging efficiency.
Product Features
- Digital Numeric Display - LED display shows numeric read out of volts, amps, amp-hours and time remaining
- Easy to read multi-color LED bar graph
- Splash proof panels allow for outdoor mounting and hands free operation
- Displays key historical battery information such as charge efficiency, deepest discharge, and average discharge
- Compatible with 12 and 24 volt DC systems
- Works with any battery type
- Includes DC shunt
- One year warranty
- Multicolor LED bar graph displays battery state of charge at a glance
- Works with any single bank battery system
- Includes DC shunt
- Bright digital display selectively shows:
- DC volts and amps
- Battery amp-hours consumed/available
- Time remaining to fully charge / discharge
Dimensions: 2.5" x 1.95" x 3.15" (outer bezel diameter x barrel diameter x depth)
Specifications
84-2024-00 (Link 10 temperature sensor)
Electrical Specifications
Voltage Measurement: (standard model auto range)
- 0-19.95 VDC (0.05 V resolution)
- 20.0-50.0 VDC (0.1 V resolution)
Voltage Measurement (optional prescalers):
- 0-100 V (used with standard models)
- 0-500 V (used with standard models)
Amperage Measurement:
- Low range ±0-40 A (0.1 A resolution)
- High range ±500 A (1.0 A resolution)
Amp-hour Measurement:
- Low range ±0-199 Ah (0.1 hour resolution)
- High range ±200-1, 999 Ah (1 hour resolution)
Time Remaining Measurement:
- Low range 0-199.9 hours (0.1 hour resolution)
- High range 0-255 hours (1 hour resolution)
Power Requirements: 9.5-40 VDC (DC power supply voltage)
Power Consumption:
- 50-225 mA (display auto dims with ambient light)
- 28 mA (sleep mode - bar graph display only)
Shunt Type: 500 A/50 mV (included)
Accuracy: Voltage ±0.6% of reading + 1 least count of resolution
Amperage ±0.8% of reading + 1 least count of resolution
General Specifications
Installation: Flush mount
Front Panel: Splash resistant
Outer bezel diameter (face): 2.5" (63.5 cm)
Barrel diameter: 1.95" (50 mm)
Depth: 3.15" (80 mm)
Hole cut size: 2.25" (52 mm) diameter
Weight (not including shunt): 4.6 oz (130.4 g)
Warranty: 1 year
Additional Part numbers
- 84-2010-00 (Shunt)
- 84-2024-00 (Link 10 temperature sensor)
- 84-2014-00 (Twisted Pair 25' - recommended for Link installations)
- 84-2015-00 (Twisted Pair 50' - recommended for Link installations)
- 84-6000-00 (100v - prescaler)
- 84-6000-05 (500v - prescaler)
|
